Sigelei Sibra E2 80W TC Starter Kit
Sigelei has released the Sibra E2 Kit. It consists of an adjustable box-mod with a maximum power of up to 80 watts and a tank with a capacity of up to 5.5 mL of E-Liquid capacity.
Sigelei features the Sibra E2 kit. A box mod made of a combination of zinc alloy and plastic in five color variations. The body integrates a pair of concave corners which allow hand holding comfort, an ergonomic insert and a snake-skin pattern.
In general, the form factor is quite good, in the palm of a hand it should fit comfortably. For these purposes, a plastic insert is added to the back side, perhaps a soft touch.
Sigelei Sibra E2 Controls
On the front side of the mod there is a standard fire button, a display, two adjustment keys and a USB port. The back side was provided with a removable battery cover.
The control panel has lots of features and a large faceted fire button and a connector for charging the battery.
The compartment for the battery is placed behind a removable panel occupying the rear part of the vaping device. The device is powered by a single battery size 18650.
The power of the device varies from 10 to 80 watts, in addition, supported by thermal control mode. The minimum resistance is 0.05 ohms. For power, a single 18650 battery is enough and it can be charged via the USB port with a current of up to 2A.
Performance for the single 18650 regulated mod is standard, and full functional chipset is on board.
Tank & Extra Atomizers
A replacement atomizer with a resistance of 0.28 Ohm is supplied for the included tank. The tank portion is crowned by the 810 epoxy resin driptip in various colors. The filling hole is located on the side wall of the top cap, hidden behind a metal board with engraving. It is accessed by a black notched cover. The E-Liquid capacity of the tank is 5.5mL. Below there is a scaly ring to adjust the airflow.
The package includes one mod and one tank, two atomizers, spare glass, USB cable, repair kit and instructions.
$ 49.99 – Buy Now
- Dimensions – 85.5mm by 35.5mm by 25.5mm
- Single High-Amp 18650 Battery – Not Included
- Wattage Output Range: 1-80W
- Voltage Output Range: 1.0-7.5V
- Resistance Range: 0.05-3.0ohm
- Temperature Range: 100-300°C / 212-572°F
- Ni200, Titanium, and 304/316/317 Stainless Steel Compatibility
- TCR Adjustment Mode
- Power Mode
- Superior Zinc Alloy and Plastic Construction
- Ergonomic Design
- Stylish Snakeskin Design
- Intuitive 0.91″ OLED Display Screen
- Two Adjustment Buttons
- Magnetic Battery Access Door
- High Input Voltage Protection
- Low Input Voltage Protection
- Reverse Battery Protection
- Low Resistance Protection
- Short Circuit Protection
- Overheating Protection
- Battery Imbalance
- MicroUSB Port – 2A Max Charge & Firmware Upgrade
- Spring-Loaded Gold-Plated 510 Connection
- Available in Serpentine Red, Python Gray, Serpentine Yellow, Kingsnake White, Serpentine Blue
Sigelei Sobra Mini Sub-Ohm Tank Features
- 24mm Diameter
- 5.5mL Maximum Capacity – Bubble Glass
- Superior 304 Stainless Steel
- Pyrex Glass Reinforcement
- Adjustable Dual Bottom Airflow Control Ring
- Top Cap Quarter Turn Side-Fill System
- Sigelei WF Coil Family
- 0.28ohm WF Mini Coil – rated for 30-60W
- 0.25ohm WF-H Mini Coil – rated for 40-80W
- 510 Drip Tip
- Gold-Plated 510 Connection
- Detachable Structure
1 Sibra E2 Mod
1 Sobra Mini Tank
1 0.28ohm WF Mini Coil
1 0.25ohm WF-H Mini Coil
1 USB Cable
1 Glass Tube
2 User Manual
1 Warranty Card
1 Pack of Spare Parts